TRA95076-4 1/8 SLEDGE 4WD BRUSHLESS MT GREEN

Features

• VXL-6s^™ Waterproof Electronic Speed Control
  
  • 6s LiPo compatible
  • Integrated cooling fan
  • Real-time telemetry via Traxxas Link™
  • 3-LED status indicators
  • Powered accessory ports
  • 10-gauge silicone wire
  • Integrated protection circuits
• Velineon^® 2000 kV Brushless Motor
  • 4-pole 2000 kV
  • 5 mm output shaft
  • Finned can for better heat dissipation
  • Aluminum motor cradle mount
  • Supports entire motor length
  • Reduces flex for longer gear life
• Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
• Traxxas Stability Management^®
  • Helps prevents spinouts and loss of control
  • Never dulls throttle or slows the truck
  • Adjusts from off to 100% assistance from the transmitter
• TQi™ 2.4 GHz High Output Radio System
  • TQi 2-channel transmitter
  • Traxxas Link enabled
  • 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
  • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
  • Programmable Multi-Function knob
  • Adjustable steering and throttle percentage (dual rates)
  • Adjustable steering and throttle sensitivity (exponential)
• Drivetrain
  • Full-time 4-wheel drive
  • Heavy-duty steel driveshafts
  • Large 8 mm steel stub axles
  • Steel dogbone center driveline
  • Protective rubber boots on differential inputs

• Transmission
  • Mod-1 pinion and spur gears
  • Fixed gear mesh system
  • Torque-Biasing Center Drive
• Differentials
  • Heavy-duty sealed 4-gear design
  • Large scale steel ring and pinion gears
  • Large 8 mm output shafts
  • Steel drive cups
  • Easy access bulkheads
• GT-Maxx^®Shocks
  • Longer rear shocks for more travel
  • Machined aluminum threaded body
  • Extra-large bore and capacity
  • Large-diameter damper shaft
  • Lower seal cartridge with dual X-rings
  • Height-adjustable spring retainer
  • Lower spring perches bolted on
• Suspension
  • Thick 5 mm 6061-T6 aluminum shock towers
  • Performance-optimized geometry
  • Ultra-tough composite arms
    • Made from our strongest cold-weather material
    • Molded insert for clean look
    • Rear rock deflectors
    • Press-in hinge pins to reduce play
  • Oversize molded toe and camber links
  • Heavy-duty C-hubs with oversize bearings
    • Stronger than conventional designs
    • Require no adjusments
  • Multiple mounting points for suspension tuning

• Chassis
  • 3.2 mm ribbed aluminum chassis
    • Formed edges for improved strength
  • Thick aluminum T-Bar™ for added rigidity
    • Stronger than round bars
  • High-strength buttressing on shock towers
  • Rugged locking battery compartment with quick-release door
  • Low-CG design for improved handling
  • Interlocking components for tight tolerances
  • Tough front and rear bumpers double as skid plates
  • Hidden wire management for clean appearance
• Clipless ProGraphix^® Body
  • One-handed clipless body mounting system
  • Rigid internal frame
  • Molded body reinforcements for tear-through protection
  • Protective roof skids
  • Rugged high-downforce rear wing
• Steering
  • Powerful 2275 metal gear servo
    • 347 oz-in torque
    • Fully waterproof
  • High-throw bellcrank steering design
  • Heavy-duty servo saver with aluminum posts
  • Metal servo horn
• Wheels and Tires
  • TSM-rated construction resists ballooning
  • Huge 6.7″ Sledgehammer all-terrain tires
  • Tough 3.8″ black wheels
  • Splined 17 mm aluminum axle hubs

Model Specs

Motor Specs

ESC Specs