AXI00001V2T4 1/24 SCX24 1967 Chevrolet C10 4WD Brushed Truck RTR, Black
| Availability: | In stock (2) |
Product Details
In The Box
- (1) Axial SCX24 1967 Chevrolet C10 1/24 Scale 4WD RTR
- (1) Assembled SCX24 chassis, drivetrain, and suspension
- (1) Spektrum SLT2 2.4GHz radio system
- (1) Spektrum 350mAh LiPo battery and USB charger
- (4) AA transmitter batteries
- (1) Product manual
Needed to Complete
- Absolutely nothing!
Features
- Detailed 1967 Chevrolet C10 polycarbonate body in two fresh color options
- Plush oil-filled shocks
- Realistic steel frame rails for added strength
- Spektrum SLT2 2.4GHz radio system
- Spektrum 350mAh LiPo battery and USB charger
- Two LED lights in the front bumper
- 080-size brushed motor
- True, full-time 4-wheel drive
- Metal worm drive gear on front and rear axles
- 3-Link front and 4-link rear suspension
- Fully equipped and ready-to-run
- Licensed wheels modeled after 1:1 Method Wheels
- Licensed tires modeled after 1:1 BFGoodrich Tires
1967 CHEVROLET C10 BODY
The full-size 1967 Chevrolet C10 had the sturdy look of a do-it-all workhorse, and the Axial SCX24 1/24 scale RC rig follows suit. Its detailed scale body comes factory-finished in two new color options. For quick battery access, just remove two clips to tilt back the body.
WORM GEARS
The front and rear differentials house metal worm gears for durability, increased ground clearance, and strong drag brakes.
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned.
FRONT AND REAR SOLID AXLE HOUSINGS
The front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a 3-link front and 4-link rear setup.
4-LINK REAR SUSPENSION
The rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist.
OIL-FILLED SHOCKS
Oil-filled shocks have been added that allow the suspension to articulate smoothly over rough terrain. You can adjust the preload with 1mm, 2mm, and 4mm spacers to fine-tune your rig for your handling needs.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles, and dogbones provide the strength and durability needed to keep going during tough climbs and over rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
DYNAMITE BRUSHED MOTOR
The included Dynamite 88T 080-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears.
SPEKTRUM SLT2 2.4GHz RADIO SYSTEM
The Spektrum SLT2 2-channel radio system offers high-end features such as throttle/steering travel adjust and throttle limiting. The ready-to-run package is so complete, even AA transmitter batteries are included.
FULL BALL BEARINGS
Just because the SCX24 is small doesn't mean its features follow suit. There are no bushings here. The drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle.
METHOD MR307 HOLE WHEELS & BFGOODRICH® KRAWLER™ T/A® KX TIRES
The MR307 Hole is a fresh take on the classic hole-wheel design that dominated early off-road racing. BFGoodrich Krawler™ T/A® KX tires have won more rock-crawling championships than all other tires combined. The Axial version captures the same aggressive look in 1/24 scale.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
©2024 Horizon Hobby, LLC. Axial, the Axial logo, SCX10, SCX24, Dynamite, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. General Motors Trademarks are used under license to Horizon Hobby, LLC. BFGoodrich and the BFGoodrich logo are trademarks of Michelin Lifestyle Limited, used under license. Method Race Wheels and associated logos are property of Method Race Wheels, used under license. All other trademarks, service marks and logos are property of their respective owners.
NOTE: Prototype shown. Some imagery may differ from the actual product.